How dry the wet phone?

You went outside in the rain, and suddenly someone called you. One careless movement - and expensive apparatus was in a puddle. Just do not panic: follow these tips and you will be able to return your Smartphone to life.

Let's see what happens if the mobile device fall into the water. At best - nothing at all. If it is fast to pick up and shake off the water, the device may be able to move this nuisance without any damage. Anyway, just in case you can accomplish the first two steps of our operation to rescue the phone.

However, problems may arise. The greatest danger is that moisture is able to penetrate into the housing, close the wirings and form an electrical connection where it should not be. If, due to a short circuit burns out some small detail, the smart phone worth 15,000 rubles (5000 hryvnia) will turn into a useless plastic with a set of irons. There is another danger - the damage to the phone caused by corrosion or rust. The fact that rust prevents contact and thus breaks the electrical connection.

So what do you do if your mobile device has fallen into the water? We offer you an operation to rescue the phone, consisting of six steps that you can perform on the stage. In some situations it is not required to carry out all the procedures - sometimes simply disassemble the unit and allow it to dry. If the case is severe, use, and other measures. And another tip: in any phone, there are several indicators which, in contact with water, change its color. Thanks to this service center staff can quickly determine whether the contact with the water was, and if so, in what place. Therefore, in case of appeal to the experts try to convince employees that damage other phone the reason - you will not succeed.

1) Remove the battery.

The first step is to remove the battery - so you can avoid the possibility of short circuit. Following remove the SIM-card from the phone. After this it is necessary to wipe the body of the aircraft to dryness, and then by shaking devices try to remove the water existing inside. Thus outwardly released substantial portion of the liquid. However, the problem lies in the fact that water can remain in the corners of the phone body, and shaking will not help. To get rid of residual moisture, use more effective methods.

2) Drain the machine.

Place the phone on a dry towel, and put it possible to warm the battery (but in any case not in the oven - so you can damage the components) to achieve the drying components. The water present on the motherboard and display, simply evaporate and the device is likely to work again.

3) Disassemble the phone.

You can go the other way. If possible, remove from the machine the maximum amount of detail. Remove all that is removed at the same time try not to damage the device. For these purposes, you can use a screwdriver. Those places where water is present, blot gently with a dry cloth. From time to time shake open the phone.

4) Use a vacuum cleaner.

Our first thought was to use a container of compressed air, with which we remove the dust from your PC. But then we realized the mistake: under the influence of compressed air moisture can penetrate even deeper. More reasonable to vacuum the phone. For safety reasons, place the bolts, screwed in from the machine, away from the work area. Then grab a vacuum cleaner and carefully treat their device from all sides.

5) Pulling moisture.

The following method: place the phone on the night of the details in a bowl of rice and cover them with a lid - for this purpose suitable small food containers, plastic. Dry rice will pull moisture from the system.

6) Wash the display.

If after that the phone, and above all on the screen, will remain wet, you can remove it with isopropyl alcohol. In our case, we separated the components of the display from each other by inserting between them a piece of paper. We then poured into alcohol. He has three advantages: displaces water, does not conduct current, and quickly evaporates.