Corner cat with his own hands
• Small cat with his own hands
I decided to build their baleen pets scratching. The whole process and its results, see below.
That's for somebody tried.
You will need:
1) Plywood 1cm - 550 p
2) A rope-type rope, 1 cm thick (60 m) - 540 p
3) Self-tapping screws, furniture screws - was
4) Keep a blanket, my bites were once living with us the mouse - was
5) Stapler good + 10 mm staples thereto - were
6) Electric took a one-time, home - 1000 r
7) monofilament yarn, this is for mounting toys (later) - 50 r
8) 1 stick narrow plastic - 30 p
9) sandpaper - it was
10) and the shears knife working - were
Total 2170 or 1170, if there is a jigsaw + 6-7 hours.
We go into the woods and find dry wood, cut at the desired height into 2 parts.
DSP had to buy it 550 rub., Too, divide it in half.
The rope 1 cm thick. Take dense, not fluffy, so as not razlezlas. 60 meters - 540 rubles.
Rope accommodation toys - 50 rubles.
Plastic, narrow - 30 rubles.
Screws, furniture, small nails, screws.
Engineering: draw a circle using a smart and ...
... kote for proportions.
Cut 2 circles.
We draw base (+ 5 cm from the edge of circles, for stability) was excised.
Cutting edge of sandpaper, the preparation of the pillars!
Make a notch for ...
First round of break through in the circle of carnations.
After every 7-10 cm turns fasten the rope, like that.
Done Mota, from the other end and secure.
Result. Frankly, very cool! Nice touch, as the factory.
Cut a hole and treat sandpaper, so also gave a second pillar.
Fitting and transfer it to his wife. She's a cutter.
We cut plastic, shallow, on the one hand.
We break it completely (for length).
obbivat below, for the normal type.
The Golden Ratio.
With the second round, the same thing.
to punch in here for softness.
In the process.
Cut these rectangles and ...
... fasten them, it legs.
It is planned to drill.
drill and fasten.
In one of the lounges, fasten the corner like that.
and proceed to the upholstery.
Intermediate to change the design, namely - strengthening.
Make a hole in the rug (where the bracket is fastened) and through the hole and fasten the corner to the post with screws.
A general view. It turned out cool, spent 6-7 hours. It's nice to work well, to be honest.
P.S .: Toys is not attached, it will be later.